Additional options (Tubing, Masterflex kits, etc)

Additional Options
QP/M & RH/M Masterflex ® Kits*
• Adds precise mechanical flow adjustment to L/S™ drives
• Quick installation to L/STM standard pump head, L/STM
EASYLOADTM pump head, or directly to any L/STM drive
• Extended operating pressure to 100 psig
QP/M
• Flow rates from microliters to 768 mL/min
• Ceramic standard wetted materials
*Masterflex, L/S, and EASY-LOAD are all registered trademarks of Cole-Parmer Instrument Co.
Regulatory Compliance
RH/M
High Flow Tubing Adapters
For plastic case pump heads, the integrally molded port fittings
on the standard Type K pump heads accept all 1/4” O.D. tubing.
For other tubing arrangements, special port adapters are required.
#R412-0K
Adapter for 1/8” I.D. tubing
#R412-1K
Adapter for 1/4” I.D. tubing
#R412-2K
Adapter for 3/8” I.D. tubing
Stainless steel adapters for Type S
pump heads.
#R412-6K
Adapter for 1/2”
I.D. tubing
#R412-1
Adapter for 1/4” I.D.
flexible tubing
#110949
Adapter for 6 mm
O.D. tubing
#R412-2
Adapter for 3/8” I.D.
flexible tubing
#R412-5K
Adapter for 1/4-28 ferrule fittings
Regulatory Compliance
#H476-K
Adapter for 1/8” O.D. tubing
Low Flow Tubing Adapters
Threaded 1/4-28 UNF fitting to PVDF barb bottom sealing, rotating adapters consisting of a white nylon
1/4-28 fitting with 5/16” hex nut and PVDF (fluid path) insert barb.
Regulatory
Compliance
#110873A for use with 1/8”
(3.2 mm) I.D. tubing; pack of 10
37
#110874A for use with 1/16”
(1.6 mm) I.D. tubing; pack of 10
#110847-01 for use with 1/8” flexible
tubing connection to isolation gland
stainless steel “Q” Pumps; single unit
www.昀氀uidmetering.com pumps@昀氀uidmetering.com 800-233-3388 516-922-6050

Paperturn flip book system